| 1 |
Introduction/Fluid distinctions |
Ch 1, 2.1-2.3 |
| 2 |
Fluid Properties (density, compressiblity, etc.) |
2.3-2.7 |
| 3 |
Fluid Properties (viscosity) |
2.10-2.13 |
| 3b |
Fluid
Properties (surface tension, vapor pressure) |
3.1-3.5 |
| 4 |
Fluid statics (pressure, absolute & gage, etc.) |
3.6 and 3.7 |
| 5 |
Fluid statics (forces on a plane - I) |
3.6 and 3.7 |
| 6 |
Fluid statics (forces on a plane - II) Continuation of Lecture 5 |
3.8 and 3.9 |
| 7 |
Fluid statics (forces on curved surfaces) |
3.10 |
| 8 |
Fluid
statics (pressure from acceleration) |
3.10 |
| 9 |
REVIEW for Test 1 |
|
| T1 |
Test 1 - Lectures 1 to 9 |
|
| 10 |
Fluid flow (Introduction to fluid flow) |
4.1-4.6 |
| 10b |
Fluid
flow (Continuity) Continuation of Lecture |
4.7 - 4.8 |
| 11 |
Velocity,
acceleration, flow nets, etc. |
4.9 - 4.13 |
| 12 |
Energy (Energy in flows, Bernoulli equation) |
5.1 - 5.4 |
| 13 |
Energy (General energy equation, head) |
5.5 - 5.9 |
| 14 |
Energy (Cavitation, energy line, hydraulic grade line) |
5.11 - 5.13 |
| 15 |
Energy (Solution to energy equation) |
5.14 |
| 16 |
Momentum (Control volumes, momentum principle) |
4.6, 6.1-6.4 |
| 17 |
Momentum (Applications of momentum principle) |
6.4 - 6.5 |
| 18 |
REVIEW for Test 2 |
|
| T2 |
Test 2 - Lectures 10 to 18 |
|
| 19 |
Similitude (Definitions, geometric and kinematic similarity) |
7.1-7.4 |
| 20 |
Similitude (Dynamic similarity, scale ratios) |
7.4-7.6 |
| 21 |
Dimensional Analysis |
7.7 |
| 22 |
Pipe flow (Definitions, friction losses, laminar flow) |
8.1-8.8 |
| 23 |
Pipe flow (Turbulent flow, velocity profiles) |
8.9-8.11 |
| 24 |
Pipe flow (Roughness, single pipe solutions I) |
8.12-8.16 |
| 25 |
Pipe flow (Single pipe solutions II, minor losses) |
8.17-8.27 |
| 26 |
Pipe flow (single pipe solutions III, pumps and turbines) |
8.28-8.29 |
| 27 |
Pipe flow (pipes in series with expansion) |
8.30 |
| 28 |
REVIEW for Test 3 |
|
| T3 |
Test 3 - Lectures 19 to 28 |
|
| 29 |
Open channels (Introduction/Uniform flows) |
10.1-10.3 |
| 30 |
Open channels (Uniform flow, circular channels) |
10.3 and 10.7 |
| 31 |
Open channels (Specific energy - I) |
10.9 - 10.11 |
| 32 |
Open channels (Specific Energy - II) |
10.12-10.13 |
| 33 |
Open channels (Gradually-varied flow, energy, profiles) |
10.14-10.15 |
| 34 |
Open channels (Examples of gradually-varied flow profiles) |
10.16-10.17 |
| 35 |
Open channels (Hydraulic jump, location of jump) |
10.18-10.19 |
| 36 |
Fluid measurements (pipe flow) |
11.1-11.5 |
| 37 |
Fluid measurements (pipe flow - open channel flow) |
11.6-11.10 |
| 38 |
Fluid measurements (open channel flow) |
11.11-11.16 |
| 39 |
REVIEW for Final Exam |
|
| Final |
Final Exam |
|
